Q-Sox

Free Q-Sox Engineered Selection & Budget Estimate
Sketch the building or area giving overall dimensions and ceiling height. Include special features such as exterior glass, concentrations of people or equipment, open pools, etc. (Print the outline drawing if you want to use a form.)

Draw lines on the sketch indicating where Q-Sox could be installed to a) connect to sheet metal ductwork and air handling units and b) distribute the air where it is needed.. (Locate supply duct connection in the middle with multiple side/side fabric ducts to minimize cost.)

Indicate the CFM air quantity for each Q-Sox line on the sketch determined from the total capacity available from the air handling units..
Indicate the Length of each Q-Sox line on the sketch positioned as to where the air needs to be distributed.

Fax this sketch with your name, phone & fax number, the project name and location and any other pertinent data to Air Displacement, Inc @ (612) 721-0143 fax.

Q-Sox engineers will select the appropriate sizes and features recommended for the project. Q-Sox will select diameters, lengths, cloth weave densities, mounting hardware and other features based on selection parameters of 1500 fpm air velocity and 1/2" w.g. pressure at the inlet connection unless otherwise indicated by your sketch.